logo - www.advancedreceiver.com



High Performance
Receive Only
Commercial Preamplifiers

receive only preamplifier


Features:


• Low noise figure
• High immunity to overload
• Completely shielded
• Suitable for mast/tower mounting
• Small size
• Rugged low profile custom enclosure

Series PXXXVD, PXXXVDA and PXXXVDG preamplifiers have been designed for the most demanding commercial and military applications. Each model has been optimized for the lowest noise figure consistent with excellent strong signal handling capability. These preamplifiers are suitable for use in any receiver or converter/receiver system. Each preamplifier is housed in a rugged low profile custom aluminum enclosure finished with military grade black urethane enamel. Female BNC coaxial fittings are provided for the input and output connections. Other connectors or connector combinations are available. Complete rf shielding is maintained with a feedthrough capacitor for the dc power connection. Mounting holes, suitable for #4 hardware, are located at each corner of the bottom plate.

Several models of preamplifiers are available for most frequency ranges. Selection of the most suitable model for a particular application will depend primarily on the noise figure and overload characteristics required. Preamplifier models using dual-gate MOSFET and bipolar transistor devices (part numbers with suffix VD or VDA) are suitable for most fixed location and mobile applications. Gallium-arsenide FET (GaAsFET) preamplifiers (part numbers with the suffix VDG) provide the lowest noise figures and highest immunity to overload of any preamplifier types. These preamplifiers would be well suited for those systems where absolute best coverage is desired, or in areas where strong signal levels are normally a problem.

Extensive testing of these preamplifiers on existing communications systems indicate that a signal-to-noise improvement of 6 - 14 dB can be expected. For example, a 10 dB improvement in receiver signal-to-noise performance would give a users 5-watt handheld the same range as a 50 watt unit! Each and every preamplifier is precision aligned on our noise figure measuring equipment and should provide long trouble free operation.

All preamplifiers are designed to be powered by a 10 - 16 volt dc source with a current consumption of 25 mA. Low power consumption along with the small size make these preamplifiers ideal for installation within existing equipment or systems, or for remote mounting at the antenna. Mounting the preamplifier at the antenna will provide the best system noise figure.

Specifications

Model



P30VD
P30VDG
P35VD
P35VDG
P40VD
P40VDG
P45VD
P45VDG
P150VD
P150VDA
P150VDG
P160VD
P160VDA
P160VDG
P170VD
P170VDA
P170VDG
P450VDG
P460VDG
P470VDG

Freq.
Range
(MHz)

30-45
30-35
35-40
35-40
40-45
40-45
45-50
45-50
150-160
150-160
150-160
160-170
160-170
160-170
170-180
170-180
170-180
450-460
460-470
470-480

N.F.
(dB)


1.3
0.5
1.3
0.5
1.3
0.5
1.3
0.5
1.5
1.1
0.5
1.5
1.1
0.5
1.5
1.1
0.5
0.5
0.5
0.5

Gain
(dB)


15
26
15
26
15
26
15
26
15
15
24
15
15
24
15
15
24
18
18
18

1 dB
Comp.
(dBm)

0
+12
0
+12
0
+12
0
+12
0
0
+12
0
0
+12
0
0
+12
+12
+12
+12

1 dB
Bandwidth
(MHz)

2.5
2.5
3.5
3.5
4.5
4.5
5.0
5.0
8.5
8.5
7.5
9.0
9.0
8.0
9.5
9.5
8.5
30
30
30

Device
Type


DGFET
GaAsFET
DGFET
GaAsFET
DGFET
GaAsFET
DGFET
GaAsFET
DGFET
DGFET
GaAsFET
DGFET
DGFET
GaAsFET
DGFET
DGFET
GaAsFET
GaAsFET
GaAsFET
GaAsFET

Price



109.95
159.95
109.95
159.95
109.95
159.95
109.95
159.95
109.95
119.95
159.95
109.95
119.95
159.95
109.95
119.95
159.95
159.95
159.95
159.95

Supply voltage: 10 - 16 Vdc
Supply current: 25 mA
Weight: 2.0 oz.
Dimensions: outline drawing

Prices shown for standard BNC connectors
Add $10 for N, SMA - other types available
For custom frequency ranges see
Special Frequency Ranges or contact factory

about usindexcommercial productsamateur productsgunnplexer®nmr/mrimilitary
special frequency rangesaccessorieswarranty / repairordering informationcontact ushometop of page